Environmental Protection Equipment cyclone CLK diffusing cyclone dust collector

Environmental Protection Equipment cyclone CLK diffusing cyclone dust collector

The CLK diffusing cyclone is a type of cyclone that consists of an intake pipe, an exhaust pipe, a cylinder, a cone, and a ash hopper. The dust removal mechanism of the CLK diffusing cyclone is to make the dusty air flow rotate, and the dust particles are separated from the airflow by the centrifugal force and trapped on the wall, and then the dust particles fall into the ash bucket by gravity. The proportion of the various components of the cyclone dust collector, the change of each proportional relationship can affect the efficiency and pressure loss of the cyclone. The diameter of the dust collector, the size of the inlet and the diameter of the exhaust pipe are the main influencing factors. When using it, it should be noted that when a certain limit is exceeded, favorable factors can also be converted into unfavorable factors. In addition, some factors are beneficial to improve the efficiency of dust removal, but it will increase the pressure loss, so the adjustment of various factors can be taken into consideration.

The CLK diffusing cyclone is characterized by simple structure, easy manufacturing, installation and maintenance management, low equipment investment and operating costs, and has been widely used to separate solid and liquid particles from gas streams or to separate solid particles from liquids. .

Preparation for using the CLK diffusing cyclone:

1. Check if the connection parts are firmly connected.

2. Check the airtightness of the dust collector and the flue, the combination of the dust collector and the ash hopper, the ash hopper, the ash discharge device, and the ash conveying device to eliminate the phenomenon of ash leakage and air leakage.

3. Close the small flapper valve, start the fan, and start gradually after no abnormality.

CLK diffusion cyclone dust collector is widely used in metallurgy, foundry, building materials, chemical grain, cement and other industries to capture dry non-fibrous granular dust and dust dust, which can be used as recycling materials.